Case 350B Crawler Dozer Service Manual Workshop Guide

Manual Included: Service Manual: 1041 pages Specifications: Brand: Case Model: 350B Type: Dozer Manuals: Service Manual Publication Numbers: 9-67880-R1 (July 1983) Language: English Format: PDF Description Table of Contents General Engines Fuel System Electrical System Track System Power Train Btakes Hydraulic System Mounted Equipment Manual Extract Checking Noise Control The following checks must be done to make sure that there is enough noise control: 1. Check to make sure that all nuts and bolts that hold sheet metal, floor plates, guards, etc., are tight. All loose parts must be fastened in position. 2. Check all of the pads to make sure that the pads are not damaged or missing. Replace any pads that are damaged. Install new pads in any places where the pads are missing. 3. Check noise insulators such as the engine mounts, hydraulic tube insulators, etc., for damage. Install new parts if necessary. 4. Check the maximum engine speed with no load according to the instructions in Section 3012. 5. Increase the engine speed from low idle to full throttle, 200 rpm (r/min) at a time, and check for vibration. If there is too much vibration at any engine speed, find the cause of the vibration and make repairs.