Massey Ferguson FC23 Front Mower Service Manual Workshop Guide

Massey Ferguson FC23 Mower Workshop Manual – 214 Pages Model: Mower FC23 Format: PDF Language: English Type: Workshop Service Manual Publication No: 4283355M1 Description Massey Ferguson FC23 Front Mower Manual Model: Mower FC23 Format: PDF Language: English Type: Workshop Service Manual Publication No: 4283355M1 Massey Ferguson FC23 Mower Workshop Manual – 216 Pages Manual Table of Content INTRODUCTION……………………………………………………………………………………………………………………………………………..01 DISASSEMBLY OF MAJOR COMPONENTS…………………………………………………………………………………………………….02 ENGINE ACCESSORIES…………………………………………………………………………………………………………………………………03 TRANSMISSION………………………………………………………………………………………………………………………………………………04 HYDROSTATIC TRANSMISSION……………………………………………………………………………………………………………………..05 POWER STEERING ………………………………………………………………………………………………………………………………………..06 REAR AXLE (4WD)………………………………………………………………………………………………………………………………………….07 HYDRAULICS …………………………………………………………………………………………………………………………………………………08 ELECTRICAL ACCESSORIES …………………………………………………………………………………………………………………………09 SERVICE STANDARDS…………………………………………………………………………………………………………………………………..10 MOWER DECK ……………………………………………………………………………………………………………………………………………….11 INDEX …………………………………………………………………………………………………………………………………………………………….12 Nuts and Bolts • Special bolts are installed at several locations, make sure not to interchange other bolts. • Bolts and nuts must be tightened to their specified torque with a torque wrench. • ·When locking the bolts or nuts with wire or a lock washer, make sure to wind the wire paying sufficient attention to its winding direction and bend the lock washer for secure locking. • When locking bolts and nuts with an adhesive, apply the adhesive on the thread and tighten securely. • Apply an adhesive (THREE BOND TB1104) to parts through which there is any possibility of oil leaks, such as stud bolts and tapped through parts. • Each lock nut must be tightened securely. • When tightening bolts and nuts, refer to the tightening torque table. After installation, each grease fitting must be filled with grease. • When installing grease fittings, make sure to turn the fitting tips in a direction that will provide easy access for a grease gun.