Mitsubishi FBC20K, FBC25K, FBC25KE, FBC25KL, FBC30K Forklift Service Manual

Mitsubishi FBC20K, FBC25K, FBC25KE, FBC25KL, FBC30K, FB30KL Forklift  Service Manual: 230 Pages Controller Manual: 154 Pages Publication 99759-73110 English Format: PDF Description Mitsubishi FBC20K, FBC25K, FBC25KE, FBC25KL, FBC30K Lift Truck Manual Lift Truck Forklift Model : FBC20K, FBC25K, FBC25KE, FBC25KL, FBC30K, FB30KL Publication 99759-73110 English Format: PDF Mitsubishi FBC20K, FBC25K, FBC25KE, FBC25KL, FBC30K, FB30KL Forklift  Service Manual: 230 Pages Controller Manual: 154 Pages Forklift Manual Table of Content: General Information Front Axle & Reduction Differential Transfer Assembly Rear Axle Brake System Steering System Hydraulic System Mast and Forks Troubleshooting Section Maintenance Service Data This service manual deals with all components or systems of the Mitsubishi Forklift Trucks, except for the electrical system, which is covered in a Controller manual Bleeding Air Out of Brake Fluid Line Whenever any part of the brake fluid line is disconnected in servicing work, an air bleeding operation must be performed to complete the job. Air trapped in any part of the fluid line will cause the brake pedal to feel spongy. Air Bleeding Operation Procedure: 1. Tie a flexible tube, such as a vinyl pipe, to the bleeder screw on the wheel cylinder. Insert the free end of the tube into a vessel filled with brake fluid. 2. Pump the brake pedal and depress it all the way. While keeping the pedal depressed, loosen the bleeder screw. When air bubbles cease to come out, tighten the screw. Repeat this process until nothing but brake fluid flows into the vessel. 3. Repeat procedure at each wheel brake, and fill up the brake fluid reservoir to level.